SuperMoto Junkie banner

uninstall auto clutch

3K views 10 replies 3 participants last post by  RUTHLESS RAH 
#1 ·
how do i take the auto clutch out??? is it the same way as taking a stock clutch out or a bit different???
 
#4 ·
the revloc requires removing a few of the stock clutch plates to install it. did the previous owner give you any extra clutch disks when you bought the bike? if not then you will need to buy replacement disks in order to remove the revloc and set the bike back to stock. what bike is it? are you having problems?
 
#6 ·
You dont even need to pull the basket, just pull the pressure plate, pull the dyna ring and clutch stack out and add the stock plates back in. Pretty much the same as rebuilding the stock clutch.
 
#8 ·
Oh that sucks. Nothing different then. The dyna ring comes out just like a few clutch plates. I actually have the rekluse exp ring on my 07 but the installation/ removal is basically the same.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top