SuperMoto Junkie banner

1 - 20 of 58 Posts

·
Registered
Joined
·
2,046 Posts
Discussion Starter #1
I still have tons of snap-on tools to liquidate from my toolbox. PLUS the box itself

KR1100 with the side cabinate...was over 8 grand new...2500$ rolls it out

All hand tools 1/3 of new cost. (snap-on lifetime warranty still applies to new owner)

Let me know what you need..I probably got one (or two)

Jeff
SDMOTARD
 

·
Registered
Joined
·
3,999 Posts
Ga311c
Pr311
Wt11b
Wtr1a
Wtrw6a............ All Safety Wire Pliers....got Any Of These?

Mg725/mg725p? Ssdmrt4orange? Sfsm15&sfsm15

Jeff I tried to use all caps but it wont let me



Terry
 

·
Registered
Joined
·
15 Posts
tools

Would you happen to have a list?
 

·
Registered
Joined
·
1,301 Posts
1/4 in. torque wrench?..............1/4 in. sweivel head ratchet?...........lemme know
 

·
Registered
Joined
·
2,046 Posts
Discussion Starter #7
Ga311c
Pr311
Wt11b
Wtr1a
Wtrw6a............ All Safety Wire Pliers....got Any Of These?

Mg725/mg725p? Ssdmrt4orange? Sfsm15&sfsm15

Jeff I tried to use all caps but it wont let me



Terry
Im not a snap-on dealer so I couldnt tell you what those part numbers mean...yes...they are stampped on the tool but my box has approx 50k$ in tools in it...thats a LOT of searching...let me know the name of what it is your looking for.

Jeff.
SDMOTARD
 

·
Registered
Joined
·
2,046 Posts
Discussion Starter #9
Would you happen to have a list?
I have a stack of reciepts 8 inches tall...that list would take 15 pages of space.

What do you need...i probably got some or most of it...I had a shop and tooled it for three guys so most of the stuff i have several variations of each tool.)

let me know

SDMOTARD
 

·
Registered
Joined
·
2,046 Posts
Discussion Starter #10
1/4 in. torque wrench?..............1/4 in. sweivel head ratchet?...........lemme know
got the snap-on 1/4 torque wrench in the inch pound...75 bucks plus like 15 for delivery to the midwest in three days.

also have a 3/8 inch pound for 100$ (good for bikes) same 15 to ship

have a 1/2 snap-on brutus for 200 if you need a big one. 20 to ship.

let me know

sdmotard
 

·
Registered
Joined
·
3,999 Posts
The first 5 numbers are wire tying pliers, the last 2 being dual rotational.


Ssdmrt4orange. T-handle ratcheting screwdriver in ORange.

Sfsm14&sfsm15 these are the deep chrome 6point 14&15 MM's in 3/8's drive.
 

·
Registered
Joined
·
468 Posts
I would love a set of metric t-handles, at least 6-12 mm. Could also use a bunch of 1/4 inch drive stuff, including extensions and 1/4 drive torque wrench. Lemme know what ya got.
 

·
Registered
Joined
·
457 Posts
Looking for

screwdrivers
#2 & # 3 phillips and the matching in flat head.
#3 pozzi drive

Ratchet 3/8 drive
Floppy head with screwdriver type handle (straight)

Medium sized prybar

Metric 3/8 drive standard depth socket set

Standard nut driver set (non metric)

Let me know $$$

Thanks
 

·
Registered
Joined
·
475 Posts
metric deep impact socket sets 1/2 and 3/8? metric long pattern flank drive combi wrenches? #3 phillips screwdriver? 1/2 long handle ratchets? thanks
 

·
Registered
Joined
·
385 Posts
do you have 3/8" metric universal sockets from 10mm-19mm maybe 21mm and 1/2" metric universal from 12mm-21mm and 22mm?? PM me. I'm in Laguna Niguel. Compression gauge tester?
 

·
Registered
Joined
·
287 Posts
I bought his bike and have seen the box... You won't be disappointed with anything in it, or the box itself! Everything I checked out was in great condition!
 
1 - 20 of 58 Posts
Top