[Korr]

i use:
front 12 comp, 5 reb
rear 12 low comp, 12 reb, 1.5 hicomp

just deleted front spacers and 15mm fork rised.

result - not bad =)

 

[Korr]

Korr, try reducing the front compression even more. The set-up has way too much low speed compression damping. The only way to improve it is to give up the high speed compression damping and back the clickers out. If you dig into the shim stack it seemes light on compression, but removing most of the low speed portion of the stack will allow you to set the clickers back to 10-12 out AND have some good compliance and feel up front.

I understand correctly that you propose to put the comp = 10, rebound = 5?
Sorry, the difficulties of translation.
Thanks for the tip!

 

[Korr]

ok! i'll try it today

 

[Korr]

No, I mean something like
Comp=24 or even the maximum clicks out. (I don't know how many there are...)
reb=8

24 maximum.
front 24\8 - on road feels good, well-managed bike. but seems slow and soft. unusual, maybe it is too weak? maybe it feels after a "sports" setting.
rear 12\12\1.5