SuperMoto Junkie banner

1 - 20 of 106 Posts

·
Registered
Joined
·
876 Posts
Discussion Starter #1
Lookin' for a little help with mod ideas. thanks guys.
 

·
Registered
Joined
·
39 Posts
Here is some pics and info about my 434!
Head:
-Ported head by myself.
-RHC 187 cams.
-RHC valves.
-RHC valve springs.
-RHC retainers

Other engine parts:
-Athena 434 (12.3:1)
-FCR 41mx carb
-Twin Air filter
-Moded airbox
-Yosh TRC ti exhaust

50+BHP:rolleyes2:

Chassis mod: many small mods everywhere!!!
 

·
Registered
Joined
·
876 Posts
Discussion Starter #5
nice!!! thanks guys
 

·
Registered
Joined
·
169 Posts
My DRZ400SM







2002 Suzuki DRZ400s but with sm conversion

Full Yoshi Exhaust
FCR MX 39mm Carb
3x3 mod
Dyno Jet Kit
KN filter
2006 DRZ400SM Plastic
Acerbis SM shorty front fender
Redbull/Yoshimura Graphic Kit
Motomaster brakes/rotors
LED Tail section/signals
Cycra Handguards
Pro Taber handlebars
Excell wheels with Michelin Pilot Powers
Cam Chain tentioner
Chrome Polished swingarm/rear brake pedal/shifter

***Just turned 4200 miles on it the other day.....only had 2000 miles on it when I bought it not even 4 months ago!!!*****
 

·
Registered
Joined
·
22 Posts
where can i find these shroud graphics?







2002 Suzuki DRZ400s but with sm conversion

Full Yoshi Exhaust
FCR MX 39mm Carb
3x3 mod
Dyno Jet Kit
KN filter
2006 DRZ400SM Plastic
Acerbis SM shorty front fender
Redbull/Yoshimura Graphic Kit
Motomaster brakes/rotors
LED Tail section/signals
Cycra Handguards
Pro Taber handlebars
Excell wheels with Michelin Pilot Powers
Cam Chain tentioner
Chrome Polished swingarm/rear brake pedal/shifter

***Just turned 4200 miles on it the other day.....only had 2000 miles on it when I bought it not even 4 months ago!!!*****
i want these graphics. Anyone have a link to where i can buy them?
 

·
Registered
Joined
·
2,730 Posts
Mine is totally custom, it's got the Panty Dropper 3000 Mod(some refer to it as the 3x3), makes riding dangerous with all the wet poontang chasing after you.
 

·
Registered
Joined
·
1,746 Posts
This is my custom DR-Z sm. It hauls my ass when I want it to.:thumbup:
 

·
Registered
Joined
·
273 Posts
details? it couldn't be THAT drop and go could it? i've hardly seen any twin exhausts on a drz
it was all done by me and i;m no mechanic so it isn't to hard there was no special tools needed just a hacksaw exhaust putty but a welder would be handy ;)

no its not plug and play all the time depends on which system you have to be honest.

you have to cut the link pipe of the drz in half as the crf is to short.



smaller systems which are around 45mm ish diameter will slide straight in but mine is nearer 50mm so it took some expanding and swearing but i got it there.


i spaced the cans out using some more tube so i could use 2 holes in the subframe where a rack would go and just spaced out accordingly to try and miss my rear tyre.

here are some more detailed threads:

http://www.supermotojunkie.com/showthread.php?88193-twin-exhausts&highlight=
http://www.supermotojunkie.com/showthread.php?102417-twin-exhausts-mk-2&highlight=
 
1 - 20 of 106 Posts
Top