SuperMoto Junkie banner

1 - 7 of 7 Posts

·
Registered
Joined
·
165 Posts
Discussion Starter #1
Posted this in the 'bikes' section, also posting here - if I don't have a buyer for the complete bike in the next day or two, I'm parting it out.

Some quick prices, shipping refers to anywhere in the lower 48 (USA).
-forks and triples $350 plus shipping
-windscreen + mount + headlight $125 plus shipping
-windscreen + mount + headlight + guages $200 plus shipping
-oversized rotor kit $150 shipped
-front wheel with less than 100 miles, fresh Dunlop, $700

Anything else you see, inquire within!

------------
http://hawkfan4life.com/AdventureHawk/adventurehawk1.html

This was my Spring '08 project ... have been messing around with HawkGT's for years, and I wanted to go in a different direction. Pics and website tell most of the story; I went a little overboard, spent too much time and way too much money on this, and just when all was going well, an Italian beauty slipped into my life & distracted me. Bloody hell.

The bike's in Milwaukee WI, and has less than 100 miles on it since completion. Mostly set to go at this point .. could use a couple minor things attended to, but it's pretty well ready to go. $4200 cash price, partial street-legal trades considered if you've got something cheap to throw into the mix.

I will also be listing this in the parts section. TIME IS OF THE ESSENCE here, and I'll be parting it out if I don't get a buyer soon. Very soon. "In the next 24 hours". If you want any parts, lemme know.

Motor is stock and starts/runs A1. IDS2 muffler is new. Front CRF450 forks were NEW dealer takeoffs, so were the triple clamps. Electronic guages are new - hooked up for speedo, but the temp and tach sensors are still in the package. Wheels set me back $1950 for the pair, the rear is a custom hub, one of a kind. Dunlop D607's are new. Oversized brake rotor and caliper relocation bracket are new, and very lightweight.

Underseat fuel cell was custom fabricated for this project, very light in weight, looks the biz. New alloy fuel cap assembly.

Please email me direct with any questions you may have, [email protected]

Thanks for looking.
 

·
Registered
Joined
·
191 Posts
I may be needing a motor depending on what I find when I take mine apart. Let me know if you decide to part it out.
 

·
Registered
Joined
·
165 Posts
Discussion Starter #3
If you're looking for a HawkGT motor, this one's clean and crisp - never been raced. Have sold some parts today, so it's definately getting parted.

$500 for the complete motor, $100 for the airbox & carbies. $550 for the set, where are you located?

Robb
 

·
Registered
Joined
·
165 Posts
Discussion Starter #6
Updates:

SOLD -forks and triples $350 plus shipping
-windscreen + mount + headlight $125 plus shipping
SOLD -oversized rotor kit $150 shipped
-front wheel with less than 100 miles, fresh Dunlop, $700 - still available, price drop to $600 shipped to your door, continental USA - email me directly if interested: [email protected]
 
1 - 7 of 7 Posts
Top