SuperMoto Junkie banner
1 - 1 of 36 Posts

· Registered
59 Posts
I like to change my brake pins from the allen and flat head to the moose one piece.the rear is the same as a 2007 yz250 2-stroke but the front pin on the wr250x is longer than the one from a yz 2stroke. does any one else have a moose brake pin in the front that they could measure. stock pin on the 250x was 10mm longer than the yz one. i left my measurments at work so im not sure at this moment how long they both were.
also i changer the plastic rear caliper guard with a works connection from a 07 yz 250
1 - 1 of 36 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.