SuperMoto Junkie banner

1 - 8 of 8 Posts

·
Registered
Joined
·
191 Posts
Discussion Starter #1
Hi Everyone:

Ive been on here before selling supermoto bikes and tires/wheels/brakes in great shape and customers satisfied. I am in Riverside, Ca and work for large Harley Davidson/Buell dealership as specialist in sales/events,etc. I have 2 KTM's 2008 450 SXF and 07 505 SXF like new..probably for sale! soon., in the 5000.00 range depending on model, with like 10 hours each. I will post pics soon, busy with work.

I had my last injury 2 months ago in Vegas riding mx and tore rotator cuff bad...still healing. My job working too much and injuries/age are forcing me to sell the bikes but have so many new supermoto parts off Brand new 2007 KTM 560 SMR. It is all in storage and ready to pick up or ship. These will fit most KTM's SX, SXF, etc from 2002 on or older if you have newer front wheel/spacers,etc. My loss is someones gain...Im going into Flat track through a friend/racer in a short time after injury recovery.

+2007 NEW KTM 560SMR Forks with triple clamps/14mm(these are the bomb). asking 1000.00

+2007 NEW KTM 560SMR Rear shock: $500.00

+2007 NEW KTM 560SMR Magura Front brake/rotor/caliper complete: 1000.00(one of the best)

+2007 New KTM 560SMR wheelset with rear rotor/Dunlop's newest slicks.(would like to sell complete with brake system since front rotor is mouted already from factory.) Make offer for complete system or wheelset. asking
1000.00 for wheelset with tires and rear rotor at least, thats a deal.

I have many new Metzeler slicks and Maxxis slicks front/rear 17's and Dunlop rain front 16.5 new:$55.00. about 200.00 a set depending on tires.

Call me at 973 632-6931 or PM/email me on here for more info..pics or visit me at the Harley shop in Riverside, CA(Skip Fordyce HD/BUell). I live in Lake Elsinore, CA...My name is Rob.

I will take trade on Flat track stuff or bike for KTM...wheels/tires...dirt track or suspension. Thanks.

Rob
973 632-6931
 

·
Registered
Joined
·
288 Posts
I am in for the tires...may take two sets if you have them? would be interested in both Maxxis and Metzler sets..want to confirm they are brand new never run?

thanks

Ross
 

·
Registered
Joined
·
191 Posts
Discussion Starter #4
They are 5.5 rear rim/165 tire and 3.5 front/120/75 17's the newest and better Dunlops. these bikes were rare and not exported to america much later in the year a few came over. they had the better updates and brakes/tires.


Ready to Race in the S1 category, thanks to its super-agile handling and minimal weight. Lots of torque and plenty of power, which is passed to the asphalt via the specially tuned, six-gear transmission and 165 slicks.

GENERAL INFORMATION Manufacturer KTM Model Year 2007 Model 560 SMR ENGINE Engine 1-cylinder, 4-stroke, 4-valve, OHC, roller rocker lever, liquid-cooled Displacement 565.5 cc Bore x Stroke 3.94 x 2.83 in. (100 x 72 mm) Compression Ratio 11:1 Carburetion Keihin MX FCR 41 Clutch Wet multi-disc, operated hydraulically Ignition Kokusan digital 4K-3A Lubrication Pressure with 2 Eaton pumps
Engine: Motorex Power Synt 4T 10W50 DIMENSIONS Weight 241.4 lbs. (109.5 kg) Ground Clearance 11.22 in. (310 mm) unloaded Frame Double ground, chromoly-steel, powder-coated
Subframe: Aluminum Wheelbase 58.31 ± 0.39 in. (1,481 ± 10 mm) Fuel Capacity 1.85 gal. (7 l) Seat Height 33.66 in. (855 mm) DRIVETRAIN Transmission 6-gears, dog-clutch engagement Final Drive 14:45 Suspension Front: 1.89 in. (48 mm) WP USD; 11.22 in. (285 mm) travel
Rear: WP monoshock PDS; 12.2 in. (310 mm) travel BRAKES/WHEELS/TIRES Brakes Front: FTE 4-piston, radially fixed caliper, disc; 12.2 in. (310 mm)
Rear: Brembo 1-piston floating caliper, disc; 8.66 in. (220 mm) Tires Front: 120/75-17 in.
Rear: 165/55-17 in. Rake 63.5° Trail 3.54 in. (90 mm) Colors Orange
 

·
Registered
Joined
·
63 Posts
Duke II Parts

I looking for an ignition, Flywheel/stator cover for a 2002 Duke II.
Do you know where I can get a used one? Also need a front fender

Thanks
Bikermike
 

·
Registered
Joined
·
191 Posts
Discussion Starter #6
Sorry bikermike..i dont work with KTM, wish i did!...but have sponsorship with large KTM dealer out of TX, Munn Racing..call Chip at Munn Racing or 3 brothers KTM, Andre out of Temecula, CA or Malcolm Smiths Motorsports, Riverside, CA or check ebay,etc. Need to sell the parts quick or I will keep to setup supermoto and sell!!!
 

·
Registered
Joined
·
191 Posts
Discussion Starter #8
hi mark

sorry for now i would like to sell it as a set..even though never installed exept when on the new 07 560 SMR..parted out for engine...i will let you know if i seperate further. thanks. Hey Lets make a deal.!!! on parts......

Rob
 
1 - 8 of 8 Posts
Top