SuperMoto Junkie banner

281 - 282 of 282 Posts

·
Registered
Joined
·
16 Posts
Just got around to reading about Tai's 10 10 0 0 0 0 0 and 100% throttle FL changes.... ooooweeeeeee! bike pulls, smooth! Easier wheelies. Didn't do any of the fuel and timing changes yet. I've removed the O2 with the Rottweiler "fuel dongle" and removed the SAS completely.

The 10 10.../100% throttle smoothed out the low rev/speed twitch

Great work!
 

·
Registered
Joined
·
2 Posts
Hello,

I've installed these maps.
But my engine doesn't want to lower rpm in gear under 4k Rpm.
So no engine braking.

Did anybody else experience this and knows hos to solve it?

Thanks in advance
I just tried Tai's fuel / ingnition map on my 09 smc and I'm experiencing same problem with missing engine braking. Other than that engine now pulls harder from the middle compared to evo1 map with 3% fuel added and bit less popping on decel. Sai and O2 sensor turned off on both cases and same EP map was used (100% and FL switch to 10-10-0-0-0-0-0-0). I run evo1 lid + Powerparts foam filter, full akra exhaust without db killer and all emission stuff removed. What should I try next to get this engine braking sorted out?
 
281 - 282 of 282 Posts
Top