SuperMoto Junkie banner

1 - 16 of 16 Posts

·
Registered
Joined
·
862 Posts
Discussion Starter #1
So, I had a little scratch from the proceeds of selling a couple big bikes and decided to commit to a brand new bike just to see the other side of things. My RM was built on a budget the following bike was built on a little bigger budget. I really dig these mini's and decided to start a hobby business so I built this with components from some new vendors.

New off the showroom floor 2007 CRF150RB

Rad Billet Hubs
Buchanon 9 gauge spokes
Rad Nipples
Applied racing -2mm offset clamps
Fat Guy Custom springs
Forks and shock revalved to go with the springs
Galfer 270mm wave front rotor
Galfer rear rotor
Galfer Pads
Galfer front and rear braided lines
Supermoto Engineering slider kit
Supermoto Engineering bar ends
Suypermoto Engineering Peg sliders weld on universal
1/2" Nissin Master cylinder
Sprocket Specilaist Rear Sprocket
JD jetting Jet kit
Renthal Big Bike two tone bars
Renthal R1 Works chain.
I have More stuff on the way ASV levers etc

The bike has about an hour of running time and thus far it's been fun! I may not be fast; but, I at least want to look cool.
 

·
Registered
Joined
·
410 Posts
Sweet

I have to block this post from my son or I'll be spending the motherload on one of them, DAM that machine is nice
 

·
Registered
Joined
·
862 Posts
Discussion Starter #9
Thanks Guys, I've ordered 17's in addition to the 12's and I'm having custom graphics made (with black number plates) I'll post new pictures when it's done (like it will ever be done :D)
 

·
Registered
Joined
·
936 Posts
So, I had a little scratch from the proceeds of selling a couple big bikes and decided to commit to a brand new bike just to see the other side of things. My RM was built on a budget the following bike was built on a little bigger budget. I really dig these mini's and decided to start a hobby business so I built this with components from some new vendors.

New off the showroom floor 2007 CRF150RB

Rad Billet Hubs
Buchanon 9 gauge spokes
Rad Nipples
Applied racing -2mm offset clamps
Fat Guy Custom springs
Forks and shock revalved to go with the springs
Galfer 270mm wave front rotor
Galfer rear rotor
Galfer Pads
Galfer front and rear braided lines
Supermoto Engineering slider kit
Supermoto Engineering bar ends
Suypermoto Engineering Peg sliders weld on universal
1/2" Nissin Master cylinder
Sprocket Specilaist Rear Sprocket
JD jetting Jet kit
Renthal Big Bike two tone bars
Renthal R1 Works chain.
I have More stuff on the way ASV levers etc

The bike has about an hour of running time and thus far it's been fun! I may not be fast; but, I at least want to look cool.
Dude if you were closer to NY, I would MAKE YOU SELL THAT TO ME! haha
thats a sick mo fo of a lil racer!
 
1 - 16 of 16 Posts
Top