SuperMoto Junkie banner

Husky smr510 '08 lost spark problem

1K views 2 replies 2 participants last post by  HUSKY530RR 
#1 ·
Hi guys,

I check for answer all around but could not find.
Last weekend on track my bike just staled and would not start again.
It is for sure, that I dont have any spark. I tested the ignition coil as written in service manual and it seems that it is broken as Im reading 20kOhm on secondary.
But still I would like to test, that pick-up(stator position sensor) also. Does anyone can tell me how to check it? What is the resistance I shoud see between those two wires? I looked in service manual and there is no answer.
Maybe someone with working bike can measure the resistance and tell me?
 
#2 · (Edited)
Anyone?
I just measured mine and it is 105 Ohms.
It is very simple to do, jut find conector with 2 wires (red and green) coming out of generator and measure with multimeter.
Also opened stator and noticed strange hole (marked on second picture), can anyone tell me is it normal?
And on first image it seems to me there is missing one of those small metal parts or should it be like that? :headscrat



 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top