SuperMoto Junkie banner

*HELP* Evo2 Install Problem: Pod filter + SAS Bypass

1K views 4 replies 2 participants last post by  Roadrogue 
#1 · (Edited)
**PROBLEM SOLVED** as of 10/18

I am currently installing the Evo2 Kit with my full Akra system. I have NOT installed the cam yet and I am just experiencing problems with the Air Pod Filter and SAS/SLS reassignment. I ran through the install according to the directions provided by KTM Powerparts. However, the bike will not start now and used to start just fine. My fuses are good, connections are strong, the Fuel Pump goes on, battery is new, ignition fires and i have spark. No orange flashing lights or anything. Just no turnover. I have not done any map yet and I bought the bike second hand so I am not sure if the previous owner did the map when the Akra system was installed.

1) I was hoping that someone with more experience out there could take a look at my current install and point out what might be occurring to make the bike not start any longer?
2) I figured my biggest problem areas would be either the map; or
3) The confusing portion of the removal of the SLS Valve section of the EVO2 install directions.

I am posting install directions here: https://docs.google.com/file/d/0B7QGLDep-fiydEFjNVpHRXRMMDQ/edit?usp=sharing

THANK YOU IN ADVANCE! ALL HELP IS ACCEPTED AND DONT BE AFRAID TO TALK TO ME LIKE I AM 5 YEARS OLD

All the images of current install are here:
https://www.dropbox.com/sh/9trndyfjppf8s7i/3Auuym8r2f
 
See less See more
#2 ·
The install instructions link doesn't work for me.

Does it crank over but not fire up or doesn't it even crank?

Do you have TuneEcu and does it read any error codes?

If it worked before you installed the pod then it is almost certainly that something isn't reconnected properly. Recheck and go back to basics ie. do you have fuel in the tank etc.
 
#3 ·
Thank you for the reply. Going to try to post these instructions again:
https://docs.google.com/file/d/0B7QGLDep-fiydEFjNVpHRXRMMDQ/edit?usp=sharing

I guess what i mean is that it won't start = engine cranks (running the battery down) but the bike Fails to start.

I just got the TuneECU today and I am going to check to see if any codes come up tonight.

I will try and tear it down again tonight, but all the basics should be in check at this point. Let me know if you still cant see the instructions.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top