SuperMoto Junkie banner
1 - 20 of 22 Posts

·
Registered
Joined
·
1,655 Posts
My Dad is buying a KLR (ugh:rolleyes:), so his Husky is up for sale . . .

2006 Husqvarna SM510R
Meticulously maintained, looks and runs great. Currently has 3,013 miles. Always street ridden, never abused, never wheelied (no kidding, wheelies scare him). The bike was down one time in the dirt, resulting in a scuffed front fender and radiator shroud, and bent handlebars. The bars were replaced with a set of Fly aluminum bars in the factory bend/color. The factory Arrow built exhaust has been derestricted. The factory D208s were replaced with a set of Continental SportAttacks at 2,177 miles. New factory clutch pack at 2,928 miles. New oil and filter at the same time. The factory T coolant hose pipe was replaced with the Uptite Racing Y pipe, greatly improving cooling efficiency. Coolant flushed and replaced with WaterWetter. The seat foam was notched, lowering the seat height by about 1" and also holding you in the proper riding position. New Lockhart mini turn signals in the rear.

  • New oil, filter, and screens cleaned at 10 hours.
  • New oil, filter, screens cleaned, and valves checked at 20 hours.
  • New oil, filter, and screens cleaned at 50 hours.
  • New oil, filter, screens cleaned, and new Continental SportAttacks at 70 hours (2,177 miles).
  • Valves checked, air filter cleaned/oiled, new plug at 78 hours (2,398).
  • New oil, filter, screens cleaned, new factory clutch pack, Uptite Racing coolant Y-pipe, new upper radiator hoses at 98 hours (2,928 miles).
Located in Lancaster County, PA. The bike is currently being financed, it will be paid off when it sells and the new owner will receive a clear title with no liens. Price is $5,800 o.b.o. Price dropped to $ 5300.00 (06/24/08) Thanks for looking.



 

·
Registered
Joined
·
62 Posts
im also in lancaster county. i have an 07 TE 510 that i want to s/m. where did you get your axle and footpeg sliders ? are they husky specific ? thanks, scott
 

·
Registered
Joined
·
1,655 Posts
Discussion Starter · #5 ·
My dad machined the axle and footpeg sliders himself from white polyethyline.
 

·
Hawk Baron
Joined
·
1,503 Posts
"Always street ridden",..... "laid down once in the dirt"

just an observation. Nice bike
 

·
Registered
Joined
·
1,655 Posts
Discussion Starter · #18 ·
Look, all you tirekicking, ad not reading losers: THE BIKE IS SOLD! How come once you say IT'S SOLD, you get all the replys? STOP EMAILING ME! IT IS GONE!
 
1 - 20 of 22 Posts
Top