SuperMoto Junkie banner

F/S (2) 2000 CR80's Set up for Motarding

468 Views 3 Replies 4 Participants Last post by  superbikemike1
2000 CR80 that is complete and ready to race today!
This one has a 90cc top end
Hot Rod Crank and rod
V force reeds
Full MX tech suspension
Wave Rotor
WER radial stabilizer
17' sun rims
Renthal Fatty Bars
Bark Busters
FMF Pipe
FMF Shorty Silencer

I'm sure there is more I'm missing, check out the pictures..

2000 CR80 That is complete and ready to race today!
This one has the stock bore
Fresh MX Tech Suspenstion
BRE Fresh Top and Bottum
Wave Rotors
WER Stablizer
New DP Clutch
17' Sun Wheels
Black Body Kit

Spares Include:

3 tanks
2 body kits
two cranks
new levers
new air filters
new stiffer springs (front and rear)
Flat slide mikuni carb, stock pipe
flat track pipe with carbon can
fmf rev pipe
HI TECH pipe
frame and sub-frame..

$1500 each and I'll split up the spares..

2002 CR125 That is complete and ready to race
Fresh Top End (bored to a 146 I believe)
Pro Taper Bars
UFO Bark Busters
FMF Gold Series Pipe
FMF Shorty Silencer
New Wave Rotors and Calipers
Suspension lowered and set up by MX Tech
Excel 17" wheels
Two spare cylinders
One spare head
Braking caliper and line and master
Stock forks and shock spring..

$1800 firm.. This is a first kick bike.

Bike are Located in Wisconsin but will consider shipping at buyers expense.

Contact me @ 920-427-3727
See less See more
1 - 4 of 4 Posts
nope , the 80's are both gone, I know because I bought the last one :)

The 125 is still available.
Any chance you will be around Buffalo any time? I want the 125.
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.