[xr650r_sm]

I have an EBC rotor and relocator kit and the relocator needs about 3/4" of washers for the stock caliper to fit, have others had this problem?

Also, does it matter which way the buttons face, in or out on the disk? This only fits with them in. If they are facing out they hit the relocator bracket.

This bracket either wasnt designed for this bike or something on my bike is way out of spec.

 

[xr650r_sm]

I think your problem is the bolts were too long and the ends were hitting the buttons? I am having that problem. But I also have the problem where the caliper doesnt sit flush against the bracket, so I am having to put spacers in between them where the bolt joins them.

Also, with my buttons facing out, even with shorter bolts so they didnt hit the buttons, the buttons still are about a hairs width away from hitting the relocating bracket, are your buttons that close?

Thanks for the reply

 

[xr650r_sm]

Here is a picture of the relocator on my 2007 XR650R. See where the washers are? Thats a stack of washers right in the middle of the picture. Is there metal on the relocator on yalls, or did a spacer come in the kit why yall got it? Thanks for the help.

 

[xr650r_sm]

Thanks for the pics, you solved that mystery. I cant believe I did what my picture shows, but the directions said to use the bolts supplied with the rotor/relocator kit to attach the caliper to the relocator. Im just glad the instructions didnt tell me to jump off a cliff.oo:

THANKS for the help