[hitman1985]

I am parting out my 2010 SMR 510, had roughly 2600 miles on it, only thing im going to hold on to for now is the main frame and the crank case assembly. The rest of the parts are available, its a lot to list, so please feel free to pm / reply about what specific part you need. i will be publishing a list below with sold parts, makes it easy to tell whats gone.

Please keep in mind, this is first come first serve, i don't want to hold parts except frame and crank case!

Pictures:
Photobucket album with more pictures of stuff:
http://s173.photobucket.com/albums/w45/hitman1985/plastics muffler/

PRICES:


- Speedometer with mounting bracket (8000H0313 + 8000H0315) - $ 170 shipped - as pictured with 2 keys for the ignition

- both Rims with tires and rotors + rear sprocket - $ 785 + shipping ($ 750 cash if picked up)- as pictured without axles or spacers

- Fork with everything in the picture (except the decal sticker on the fork guard), i would like to keep it as a combo- $ 1750 + shipping

- both silencers with springs (8000H0756 + 8000H0546 ) - $ 239 + shipping - see pictures, one of them has a slight imperfection, the other is fine

- midpipe with o2 plug and the standard sensor (8000H0545 + 8000A6741 + 8000A7724) - $ 140 + shipping - see pictures, stock cable was never used
- Engine Guard (8000B0157) - $ 25 + shipping
- Foot pegs complete set with pins and washers (80A089953 + 80A089962) - $ 67 shipped
- Air Filter Box (8000B0247) - $ 17 + shipping
- Gear Lever (8000A3488) - $ 40 + shipping
- Rear Brake lever (8000A7634) - $ 45 shipped
- Front Brake Lever (8000A7146) - $ 35 shipped

- Rear Brake Caliper (8000A4291) - $ 165 shipped

- Front Brake Caliper (8000A6078) - $ 245 shipped

- Electric Starter Motor (8000B1373) - $ 150 + shipping
- Coil + Spark plug cap (800091976 + 8000A6740) - 25 + shipping
- Throttle Body (8000A6758) - $ 330 shipped
- Camshaft Exhaust (8000A4953) - $ 175 shipped
- Camshaft Intake (8000A5595) - $ 175 shipped
- Clutch housing (8000A9202) - $ 115 + shipping
- Clutch plates (8000A9764) - $ 75 + shipping
- Cylinder head (8000B0407) - $ 450 + shipping
- Cylinder (8000B0645) - $ 295 + shipping

- Rear Swingarm with everything mounted as in the picture (will be cleaned before shipment...) - $ 995 + shipping ($ 950 cash if picked up)
- Main frame w/ clear title (8000H1691) - $ 999 + shipping - will be sold last ($ 950 cash if picked up)
- Tank + Fuel Pump Assembly (8000B0376 + 8000H1402) - $ 450 + shipping
- Fuel pump assembly by itself (8000H1402) - $ 340 shipped
- Tank by itself (8000B0376) - $ 210 + shipping

- both Radiators with plastic guards - $ 130 + shipping (the bend doesn't cause any leakage and the channels seem fine)


***Prices are subject to best offer depending on what parts are bought in combinations or single and shipping expenses of them, im by far not going to expect top dollar, nor am i looking to get ripped off***



SOLD ITEMS:
Kickstand with both springs and retainer clip - shipped
Acerbis Hand Guards - shipped
ASV Clutch Lever - shipped
Throttle cables - shipped
Throttle tube - shipped
On/Off + killswitch assembly - shipped
Radiator Fan with bracket - shipped
both rear numberplates (subframe mounted) - shipped
both plastic frame guards - shipped
REAR foot rest kit (8000B0152)- shipped
ASV Brake Lever F3 shorty red annodized - shipped
Both Tank Panels (8000H1348 + 8000H1349) - sold
Both Radiator shrouds - sold
subframe bare - sold


If you need a quick response or fast info on a part, feel free to email me @ [email protected], i will be at work till 6pm EST daily, so mostly will respond to emails on the quick...

 

[equalz]

what do you want for the asv clutch lever?

 

[hitman1985]

what do you want for the asv clutch lever?

id honestly prefer to keep them as a set as they are both brand new and were only mounted to ensure fitment, but if you want just the clutch side, id say $ 60ish, but open for a counter offer as well

 

[06-530rr]

Price on blown motor?

 

[hitman1985]

Price on blown motor?

motor isnt blown, transmission gear stripped, motor ran fine before i shut her down for the teardown, however, theres a very very tiny nick on the bottom end of piston from hit hitting the top of the crank case, nothing that would cause it not to run as i was told by my friends that were overwatching the teardown, pics can be sent via pm or what not, ill take some detailed pictured tomorrow after work about the whole front end / rear end and so on as well...

 

[tazzy562]

pm'd waiting for an email.

 

[tazzy562]

radiator fan

interested in this as well waiting on your pm tomorrow.

 

[custom1340]

wheels & tires

do you still have them ,if so how much, thanks

 

[hitman1985]

Everything is still available, if you need quick answers, hit me VIA email please

 

[rocketsprink]

Email sent

 

[hitman1985]

replying to everything right now...

 

[equalz]

Coin sent for the asv clutch lever!

 

[hitman1985]

Coin sent for the asv clutch lever!

thanks, ill pm you with the shipping info and details...

Topic updated with sold parts

 

[Tecates4Ever]

payment sent thanks

 

[hitman1985]

payment sent thanks

received, thanks


Listed some parts prices, they are or best offer....

 

[hitman1985]

bunch more parts sold, shipped most of them so far,

crazyhatch, i cant reach you via pm due to your inbox being full, please email me or clear your storage and hit me up via pm again.

Greetz

 

[stan23]

PM Sent. I'll take the brake lever.

Also is the headlight+headlight bucket for sale?

 

[hitman1985]

PM Sent. I'll take the brake lever.

Also is the headlight+headlight bucket for sale?

pm replied, the headlight is currently pending response, as im trying to move the headlight as a whole with the assembly and blinkers attached mate

 

[hitman1985]

nothing pending at the moment, prices as said are or best offer...

bike is now 100% torn down and will be at my house starting 9 pm EST tomorrow, ill have more detailed images of the frame and all the cables and such available at that moment as well...

 

[hitman1985]

just updated a bunch of stuff and tried to get some organization going, ugh thats not going to happen till we get down to 10 or less parts sorry

i put a thumbnail above every part i had pictures of at the moment, more pictures of the parts are in the album itself on photobucket, so feel free to browse thru it.

ill have the rest of the pictures up by tomorrow evening if all goes well!