SuperMoto Junkie banner
1 - 17 of 17 Posts

·
Registered
Joined
·
18 Posts
Discussion Starter · #1 ·
Location: Torrance, CA 90503

total of 8.5 hours use. As new.

Set up for supermoto with:

Pro Valve Supermoto Suspension, installed and tuned by Pro Valve.
Pro Circuit Ti 4 Titanium Exhaust,
STM slipper clutch with carbon fiber clutch cover,
17 x 3.5 front and 17 x 4.5 rear Excel rims,
Dunlop racing slicks (soft front and medium rear – both near new),
Stock hubs powder-coated metallic red,
MotoMaster front brake kit,
steel-braided front brake line with carbon fiber hose guide,
K&N air filter,
CRF450X coolant reserve tank,
LiteSpeed carbon fiber skid plate,
red anodized carburetor catch can,
TokyoMods carb modifications,
Acerbis pro hand guards,
Engine Hour Meter with RPM also.

Was converted in '06 when the bike was new, ridden in summer '07 and not ridden since October '07.

$5,450 obo

Tim
310 872 9642
 

·
Registered
Joined
·
18 Posts
Discussion Starter · #3 ·
Yep, apparently (I didn't install it) the coolant reserve tank fits straight in there. The guy who built the bike works for Honda Motorcycles development here in Torrance, so he knew what would work well and built the bike as you see it today.
 

·
Registered
Joined
·
18 Posts
Discussion Starter · #12 ·
Will ship if buyer arranges and pays up front.

Not sure on street legal, that would be up to your local state regulations.
 

·
Registered
Joined
·
18 Posts
Discussion Starter · #13 ·
Price drop. $4,800

Bike is as new condition, lots of extra's to make it an awesome track bike, or full race bike.

Let me know any interest,

Thanks

Tim
310 872 9642
 

·
Registered
Joined
·
1 Posts
any pictures?

any pictures?

Location: Torrance, CA 90503

total of 8.5 hours use. As new.

Set up for supermoto with:

Pro Valve Supermoto Suspension, installed and tuned by Pro Valve.
Pro Circuit Ti 4 Titanium Exhaust,
STM slipper clutch with carbon fiber clutch cover,
17 x 3.5 front and 17 x 4.5 rear Excel rims,
Dunlop racing slicks (soft front and medium rear – both near new),
Stock hubs powder-coated metallic red,
MotoMaster front brake kit,
steel-braided front brake line with carbon fiber hose guide,
K&N air filter,
CRF450X coolant reserve tank,
LiteSpeed carbon fiber skid plate,
red anodized carburetor catch can,
TokyoMods carb modifications,
Acerbis pro hand guards,
Engine Hour Meter with RPM also.

Was converted in '06 when the bike was new, ridden in summer '07 and not ridden since October '07.

$5,450 obo

Tim
310 872 9642
 
1 - 17 of 17 Posts
Top