SuperMoto Junkie banner
1 - 1 of 1 Posts

· Registered
13 Posts
Discussion Starter · #1 ·
I’m itemizing my 2002 S4 part out and want to gauge interest. This is a complete bike, fully functional. I want to remove parts as to have a rolling chassis for mobility. The only flaws are a cracked OEM gauge face and a right cracked rearset that a board member has donated. Help support my Supermoto madness! I just moved to San Diego and need to jump into the local digs.

Items to be sold are:

• Black FI tank (small 1/16 scratch)
• Grey Marchesini wheels with Pilot Power tires (about 1,500 miles on them)
• 916 motor with 19k miles and podercoated black stock pressure plate.
• Aluminum swingarm powdercoated black (rubbed are on right side from high mount cans but has been powdercoated over)
• Headlight bucket and hangers powdercoated black
• Headlight U bracket cut for gauge lowering with custom brackets powdercoated black
• Upper triple from an S4R powdercoated black
• Lower triple clamp powdercoated black
• GSXR front end including: Speigler brake lines (smoke black with gold fittings), 4 piston Tokico calipers, and all necessary spacers. A complete swap!
• Clutch and Brake master cylinders with black shorty Pazzo levers.
• Open lid airbox with K&N filter (both lower and upper portions.)
• Stock airbox with OEM filter (both lower and upper portions.)
• Throttle bodies
• Rear brake caliper
• Woodcraft 500 mm clip ons
• Rear brake lever
• And other misc. items from the bike. Feel free to ask via email @ [email protected] part out/?albumview=slideshow
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.