SuperMoto Junkie banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-8 of 8 Results
  1. New SuperMoto Riders/Members
    Hi All, names Ben, 40yrs old and only been riding a little over 5 years now so I have alot of lost time to catch up on !! When I decided to get back into riding after a year or so break I had little interest in dirt bikes or single cylinder engines in general... then I rode a Vitpilen 401 and...
  2. Yamaha
    2 months ago i bough a wr426 for the price of 1500 euros , my purpose was to fully rebuilt it , so far i have replaced mostly everything in the motor and it runs like new and the way the power is delivered is amazing ... I love this motor because of the reliability and the power curve so i...
  3. Wanted
    Well... pulled a newb move while trying to remove flywheel with puller....ran bolts right up on stator windings. So if any has one that is good please give me a holler. Thanks.
  4. Tech/Setups for Supermoto
    Hello Im putting my 98' WR400F into a supermoto setup for the road. i have at the moment a pair of Excel supermoto Generation 1 rims. but no carriers because you cant buy these anymore. My great problem is i want to fit new hubs and spokes to my existing pair of rim "rings" so i cant mount...
  5. Tech/Setups for Supermoto
    I have a 1998 Wr400 that has been down for a while. I was riding it about 2 months ago, when it suddenly started to surge in power, then immediately died. I tried to restart the bike, but it had no compression. After i tore it down, I found a piece of the carb vacuum plate (FCR MX 39) stuck in...
  6. Project Builds Showcase
    So after many many hours spent reading about other projects, I finally decided to start one of my own Supermoto Projects
  7. Tech/Setups for Supermoto
    I am in the process of bringing an '00 Wr400 back to life. I am now in the electrical phase and discovered that the previous owner has damaged the stator and used the wrong type of flywheel puller because there are marks from puller arms on the back of the fly wheel. My question is how much...
  8. Wanted
    Found what i was looking for.
1-8 of 8 Results