SuperMoto Junkie banner

rims

  1. bending rim solutions xr650r

    Tech/Setups for Supermoto
    I recently finished my supermoto build and went for a ride on my xr650r to scrub in my tires. during my scrub in I bent my rear rim twice on a moderate trail in the rockies. I was running 30 psi on my rear when this happened. I have talon hubs with behr rims. The rim size is 17x5.0 with a 150...
  2. Dubya Supermoto Wheels $999/set

    Dubya USA
    Dubya now offers a Supermoto wheelset for $999. You can also add colored spokes and nipples. Visit our website or call 714-279-0200 *mention Supermoto Junkie and receive a FREE t-shirt*
  3. Ktm 690 enduro R supermoto rim 4.25" vs 5"

    Tech/Setups for Supermoto
    Hey everyone, New to the forum, I was looking for some opinions of 4.25" rims vs 5"? I am buying a set from motoxindustries and I can either get 4.25 or 5. What is the difference with the two? From what I've seen from looking around is that smaller rim equals better handling but bigger means...
  4. Husky Rim Decals

    Chat
    Does anyone know where you can get these RIM decals?
  5. 16.5 & 17 inch super moto rims & tires for sale. - No Longer Available

    Bike Parts
    16.5 & 17 inch super moto rims & tires for sale. Excel Rim with Orange Hub- $315 Rain Tires - $275 16.5 Inch Front Rim w/ rain tire- $250 16.5 Inch Front Rim w/tire- $250 Brake Disc Relocation Bracket for larger brake caliper-$150 K&N High Flow Air Filter $150 Red Baron Adjustable Super Moto...
  6. Rim Conversion

    Tech/Setups for Supermoto
    Is it possible to convert a set of tubed rims to become tubeless? Could I use a glue/epoxy of some sort? Or how about a special tape? I'm sure I'll need to install some sore of valve stem. Any suggestions?
  7. DRZ400 dirt wheels and gel seat

    Bike Parts
    Rims and tires off a 2005 DRZ400S. Good shape only 3k miles on rims and very few on Shinko Trail Master tubeless tires. No sprocket included, has S front and rear rotor and I also have rotors of an SM I would be willing to part with. Asking $600 + shipping.[SOLD] Also have lower gel seat in good...
  8. Chain ruining my shiny new sumo rim!

    Street Tarders
    I bought my wr 426 already motard and I found straight away that the slack in the chain whipped the crapola out of my rim and it is ruining it. There is little to no room between the wheel and chain and I'm wondering what I could possibly fabricate to attach to the swingarm to keep the chain off...
  9. WTB: Supermoto Wheels for a KTM

    Wanted
    The bike is a 2011 KTM 250 XC-W and I'm looking for a set of wheels, preferably with tires. Post up what you have! Thanks
  10. dirt track tires or wheels 19"

    Wanted
    I am looking to get into dirt track and want to buy some dirt track wheels that will fit in my RMZ 450. I can work with other models through. Send me info on what you have. also have a complete front supermoto wheel to trade or sell.
  11. Alpina wheels 5.0 or 5.5 on YZ450F 2011?

    Tech/Setups for Supermoto
    Anybody has had the experience of fitting a 5.5 rear rim on a Japanese bike (mine YZ450F 2011)? Any serious modifications needed? What are the pros and cons? If you have experience in this matter your advice is much appreciated.
  12. 01 ktm 400 exc street rims/hubs needed

    Wanted
    Need some wheels for my 01 KTM 400MXC. Not really needing the whole SM look, just wanting to have some Enduro tires and wheels that i can swap out for some street fun periodically. I have Paypal.
  13. crf150r setup

    Tech/Setups for Supermoto
    Ok, I know there are a few posts regarding this, but not much beyond rim suggestions. This is my first ground up build and of course the 150r doesnt seem to have alot available for the conversion. *I found Excel 17" rims at ProCycle which seem a better deal than the Haans offered @...
  14. half black half white rims

    Husqvarna
    I want to paint my rims on my SMS 630 half black and half white, but i dont want it to look horrible or flake. Any tips on how to paint rims myself to where it will last?
  15. QUESTION!!!!!!! CRF150R Which size is better for rims

    Chat
    :bowdown::bowdown::bowdown::bowdown::bowdown: Which size is better for rims...... 17 or 16.5 inches AND 2.75 or 3.5 front for a crf150r as I'm doing 3.5 for the rear. how does having 3.5 in both front and rear affect the riding? im only 5'5" and 115lbs if that matters..... also, i...
  16. how do i tell if new wheels will fit my bike?

    Tech/Setups for Supermoto
    i have a 97 honda xr250 that is on its way to being a sumo but i want new wheels so i can get better street tires on it. how do i know if the wheel will fit on my bike? also, should i just get an 18 for the front to match the 18 in the rear, should i get a new set of 18s for the front and rear...
  17. XR400R 17" Wheels, hubs, expanded tank, sprockets...

    Wanted
    New owner to a 2004 XR400R looking to get an extra set of wheels ... prefer 17" complete supermoto style but will work with stock sets or even hubs alone and build my own. Also, looking to get an oversized gas tank in time, current chain/sprockets are shot and I may be interested in plastic...
  18. WTB 17x3.5, 17x4.25 36 hole rims SoCal

    Wanted
    Looking for red rims, 17"x3.5" and 17"x4.25" with 36 holes. Excel, DNA, Behr, Warp 9. Used or new considered. I'm in SoCal, so how much to buy and ship? I'll give you ZIP code in a PM for your final price. If you have spokes, I'll need those, too. But that's not required if you only have rims...
  19. 16.5" Black Excel rims with silver Talon hubs

    Bike Parts
    [/IMG] Black excel rims with silver talon hubs Front 16.5" x 3.5" (i have) 17" x 3.5" (i need) Back 17"x 5" (i have) 17"x 5" (i need) For sale or trade, prefer to trade. I just bought a 2002 crf 450r street supermoto and i...
Top