SuperMoto Junkie banner
ktm
1-20 of 276 Results
Advanced
  1. KTM
    I see this topic has been asked a few times in the past, but haven't seen anything recent... Does anyone have any sources for plastics kits for a 2005 SMC 625? Been looking, but haven't found anything...thanks in advance!
  2. Bikes
    Original owner. Purchased in Oct 2013. Never dropped. Originally built as an Enduro however, never ridden offroad. After purchasing the bike was immediately configured as an SMC with SMC components (wheels, tires, final drive, triple clamps, fender, forks, axle and spacers, master cylinder...
  3. KTM
    I am the new owner of a 2005 ktm 625 smc.I am not very tall so I am unable to sit flat footed .I have heard from some people that dropping the rear by the rear monoshock is not the route I should take . I was told that lowering links are the best way to go about lowering my bike...but I can not...
  4. Bike Parts
    Original owner. Purchased in Oct 2013. Never dropped. Originally built as an Enduro however, never ridden offroad. After purchasing the bike was immediately configured as an SMC with SMC components (wheels, tires, final drive, triple clamps, fender, forks, axle and spacers, master cylinder...
  5. Tech/Setups for Supermoto
    So the Duke 690 swing arms are super cool looking with their skeletonized supports built into a carved out swing arm body. Anyone know how close they are in specs to the swing arm on the newer models of the 690 SMC R? I'd love to see if I could make it work but am not sure how to go about...
  6. KTM
    I recently bought a motorcycle that didn’t start. After doing the normal check ups we discovered that the freewheel was worn out which caused the flywheel and stator te get damaged... Ive drained the oil but i am still affraid that there are still metal parts in the engine. Should i just do some...
  7. Tech/Setups for Supermoto
    Can I swap my ktm 2007 sm cowl to whatever smc cowl? or Do they share frame?
  8. Tech/Setups for Supermoto
    I recently whilst researching the KTM/Husqvarna 690/701 came across some interesting sites links and even better direct factory replacements for £29.97......yep that`s right a spare injector or two for your Xmas stocking 365CC A-TYPE INJECTOR (14-HOLES) (3-INJECTOR) I also came across these guys...
  9. KTM
    I have a KTM exc 125 2006 mod and I want it to look like a 2008. I have already changed the back fender to a 2008. What else do I have to do. And will this tank fit on it...
  10. New SuperMoto Riders/Members
    Hi Guys, I would like to introduce myself who I am and what i drive. I am Leon, 21 years old and i have a Supermoto (KTM SMC-R 690) and a Enduro bike (Honda NX250). Since i have the KTM i started filming myself just for the fun. I'm trying to drive as much as i can but the only problem is to...
  11. KTM
    New to this forum. I have a Ktm 690 enduro that I turned supermoto. Wings slip on, Rottweiler intake, power commander. I recently blew the engine and has been rebuilt with new valves etc. doing break in miles now. I noticed that there is an open hose sticking up near the Rottweiler filter now...
  12. Supermoto Tips & Technique
    hey guys i want to ask you a question im a 16 years old teen ager i am starting to lern for a licence and i relly want a bike that can handel off road in vications and street riding here and there is it possibel to buy a ktm exc 125 with off road tire&supermoto tires and switch betwen them for...
  13. KTM
    Hey guys, does anyone know if the Akra exhaust for the LC4 is same for all models? I've been searching endlessly for a full system for my 2006 625 smc but they are hard to come by. I'm wondering if any Akra exhaust built for LC4's is interchangeable and essentially the same part. For example...
  14. Project Builds Showcase
    I started this project a while ago, but figured it would be neat to show progress up until today. Started as a 2004 KTM 250 EXC, in pretty decent shape. I rode the hell out of it, was a GREAT trail bike. Never really had to do much of anything to it. However, I can't leave things alone. So...
  15. Supermoto Tips & Technique
    Hello guys, I just recently sold my 2008 Husky SMR450R bored to a 100mm with the Toxic Moto high compression piston and had the RR timing cams etc in it. Absolutely lovely bike for both aggressive road riding and track days/amateur races but I wanted to do a brand new bike build and not have a...
  16. Street Tarders
    Is there any way to get a proper supermoto fender for this bike 18 ktm 250 tpi? I hate the aftermarket acerbis look, would really like the factory ktm supermoto fender orange from 2012 which is doable with a mount from nihlo but the orange color has changed over the years. I don't know how to...
  17. New SuperMoto Riders/Members
    Ive got a pretty much stock 07 DRZ400sm and want more power. Im thinking of doing 3x3, jet kit, full yoshi exhaust, maybe fcr 39 carb. But the question is as follows: is all this money I would spend on these mods worth it, or would it be better to sell the drz and buy a bigger supermoto, like...
  18. KTM
    Hey guys I was looking for some info and perhaps someone in here might be able to help me out. If you have 2006, 2007 625 SMC / SXC (or even 640) and have done any top end / bottom end work: Could you confirm that your specific model has BOTH 2 piston oil jets AND 2 crankshaft roller bearing...
  19. Wanted
    Hi everyone my name is joey and i have been looking for a dev tech swing arm for a ktm smr 525 2005 rfs for a while now i am hoping that someone will have one somewhere that they want to sell i am in NYC USA if any one knows of one for sale please let me know i would be very thankful....
  20. Wanted
    I looped and put a hole through my upper left fork tube. I either need to replace the tube and have the fork rebuilt or buy a new fork/forks for the right price. Help me out please. I'm located in north East Florida.
1-20 of 276 Results
Top