SuperMoto Junkie banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-4 of 4 Results
  1. Husqvarna
    I have looked everywhere i could find for axle sliders for my SMS 630 and found nothing. My question is will sliders for the SM 610 fit/work on my 630? Here is a link of the set i found. Thanks in advance for any/all help. Jon
  2. Wanted
    I'm In The Market For A Sumo! From The Research I've Done A KTM 690SMC Is What I'd Ideally Be Interested In, But I'm Also Eyeing Husqvarna SM510 And SM610's. New Or Used I Suppose, But Preferably Used (And Well Taken Care Of). Thanks For Your Help! :cheers:
  3. Husqvarna
    i want to re-torque the engine mounts on my 06 sm610 and wanted to know their torque values. the manual reads only "frame to engine plate fastening screw 26 ft/lbs." im guessing that is where the engine mount on the valve covers mounts to the frame, correct? what about the valves of the other...
  4. Husqvarna
    im going to replace the head gasket on my 06 sm610 this summer but already replaced the cam chain a few thousand miles ago. the bike has 25k on it so I want to replace/inspect anything that could need replacing when the engine is what much disassembled. suggestions on placed to look for problems...
1-4 of 4 Results