SuperMoto Junkie banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 21 Results
  1. Tech/Setups for Supermoto
    Hello I just bought a ktm 125 Xc-W 2018 and I’m thinking of buying a moto-master race brake kit but I am wondering if the stock brembo brake is better, I have a 270 vmx brake disc (I know it’s bad) What I have now: - stock everything else but the disc is a Chinese tin plate what the...
  2. Street Tarders
    G'day. I have a 2010 CRF450X Motard for street use and recently purchased a Brembo front brake kit (13mm MC) from a member here, however the lever is longer than I am and I need a short lever to fit under the hand-guards. I have searched online but it is like looking for a needle in a stack of...
  3. Tech/Setups for Supermoto
    Hi guys, I'm looking at fitting a better braking system, currently eyeing up a 4 pot axial brembo caliper off a Ducati 900SS mated with a 5/8" Master Cylinder. What i'm looking for is if anyone has done this in the past, I'm concerned about the brake caliper not clearing the spokes. I do...
  4. Project Builds Showcase
    'Tis the season for more Mods. Been over the road for 5 months (Gag!). Had a ton of stuff at my UPS Store box. Got the bike stripped down. Ton of mods and fabrication to be done. Also the bike has not been started in 5 months due to me being gone. I though the Moty battery would surely be dead...
  5. Wanted
    Looking for a race quality set up for a 2007 CRF450. Motomaster, Brembo, Braking, Beringer. . . Prefer complete set-up but interested in individual pieces as well.
  6. General SuperMoto Chat
    Alright guys, interesting story cut short... I'm doing a street legal 08' RMZ build and just received my calipers in from japan.webike. $650 or so for what i thought was one, turns out it's a pair of 40mm's. Question time... I found a brembo relocation bracket (SKU 70.2007 - can find here...
  7. Wanted
    Doing a SM conversion for a RMZ and am looking to buy a front caliper to replace the bland stock one. My color setup now is White/Black/Red so the colors will need to be matching some how. It would be shipping to Massachusetts, let me know what you guys have. Right now the best cost I've...
  8. Bike Parts
    SOLD-KTM hard parts by "Braking" caliper and Brembo Master ( Best Offer over $275) Sold.
  9. Bikes
    I have a 2009 Yamaha WR450f Supermotard. Bike has had very little use and never abused. Bike runs and rides great!! Price is $5,750 and its located in Falling Waters, WV 25419 (Very close to Summit Point). I can help with delivery within 150 miles for the cost of fuel/tolls. You can contact me...
  10. Bike Parts
    Wanting to sell a Moto-Master caliper, Brembo master cylinder with a steel braided brake line. They work awesome! I just don't have time to ride so I am selling some parts off my bike. The mount on the caliper is for a 2004 CRF450R but you can buy mounts for any bike fairly cheap ($70+/-)...
  11. Bike Parts
    50stunt Stunt pegs-224$ new from 50stunt, 150$ SHIPPED Renthal Fat Bars Black+50stunt bar ends, 50$ SHIPPED 50stunt Front/Rear axle sliders black-80$ each pair new from 50stunt, front/rear pairs for 100$ SHIPPED Street pegs-90$ new from 50stunt, 50$ SHIPPED DID 520 O-Ring chain, 100$ new from...
  12. Bike Parts
    Great front brake setup ready to bolt on... -Black Brembo 4 pad radial mount caliper (100mm spacing) with almost new pads. -Braking 16mm radial master cylinder -Factory Pro Racing Powerslide 320mm rotor for KTM hub with extra outside ring -QTM radial caliper bracket for KTM forks -Orange Hel...
  13. Bike Parts
    Sadly, time won't allow me to play at the track so the SM kit needs to go. Was mounted on my '09, which has the larger rear axle, but it can be made to fit the earlier bikes with the correct Talon bearing/spacer kit. Black Excel rims, silver Talon hubs, Bulldog spokes w/spline dr. nipples. 16.5"...
  14. Bike Parts
    The M/C came off a 2008 Yamaha R6 (hense why it's missing the reservoir stay), it's in excellent shape as you can tell from the pictures. For a price I'm looking in the 130 usd, shipping can be negotiated. I'm located in Alberta, Canada. I would prefer shipping staying within North...
  15. Suzuki
    I need new pads but I don't know what brake I have since it's brembo and not stock. Can anyone help me figure out what I have and what I need to buy? Sizes or part numbers? Its an 06 drz400sm. Thanks...
  16. Bike Parts
    This is my supermoto conversion kit off of my 2011 Honda CRF450R race bike. This kit will fit any 2009-2011 Honda CRF450. The wheels and sliders will fit all 2003-2011 Honda CR125-450 models and the caliper will fit those bikes with a different caliper adapter. The setup includes the following...
  17. Wanted
    I'd like to make a piece of furniture out of spare parts. So I'm in the market for sdpare parts. I'll pay shipping to take worn/junked parts off your hands or pickup in CA. I would prefer nice aftermarket parts because I want it to be a little exotic. So any fancy wave rotors, Brembo calipers...
  18. Bikes
    2002 Husqvarna NOX - $9000 Very nice example of this rare beast. Low miles and hours, full carbon fiber bodywork, beautifully tuned motor, suspension and well sorted out. Bike has almost all Titanium Hardware, Brembo Monoblock brake calipers, Excel racing rims, tuned carb, full Titanium exhaust...
  19. Husqvarna
    i ordered new ebc front brake pads (#fa244) for my 60 sm610 but when the pads arrived there were only two brake pads for the front caliper instead of the four brake pads I installed the last time. On the ebc catalog it read: SM 610/S (4 bolt front disc) 02-06 FA244 SM 610 S (Radial caliper)...
  20. Bikes
    Located in Houston, Texas. I am selling my Husky SM610. It is in great shape and has never been abused. It looks, drives, and runs flawlessly.Inspection and registration tags are up to date and oil has always been changed earlier than recommended by the user manual. Title is in my hand AND in my...
1-20 of 21 Results
Top