SuperMoto Junkie banner

Search results

1-20 of 192 Results
Advanced Search
  1. D/FW Sumo Rollcall!

    Local Supermoto Ride alerts
    I'm still around on occasion...
  2. WR450 De-Restriction and Conversion to YZ Spec Street Legal Machine

    Yamaha
    The cost of making it happen would alone make it not worth it. The injector would need to be mounted into the head and that's where you'll begin to get into major $$$. Also, since it has a backbone frame the fuel pump location would be a major complication and you'd have about half of your...
  3. WR400 Street Legal Conversion. Project "Where it all Began"

    Yamaha
    Yes sir. However if they're a bit higher then flush that's not a problem. Sent from my SAMSUNG-SM-G890A using Tapatalk
  4. WR400 Street Legal Conversion. Project "Where it all Began"

    Yamaha
    Those are a little off but that's the ballpark you want to be in. Sent from my SAMSUNG-SM-G890A using Tapatalk
  5. WR400 Street Legal Conversion. Project "Where it all Began"

    Yamaha
    You'll want them to look like this. You should be able to draw a straight line across the top of the lobes. Sent from my SAMSUNG-SM-G890A using Tapatalk
  6. WR400 Street Legal Conversion. Project "Where it all Began"

    Yamaha
    Yes, both cams will have a bit of an upward pitch sort of resembling a V. Sent from my SAMSUNG-SM-G890A using Tapatalk
  7. Project: eBay Special WR/YZ 400/426/450

    Yamaha
    Haven't done a compression check yet. That's next up on the list. Sent from my SAMSUNG-SM-G890A using Tapatalk
  8. Project: eBay Special WR/YZ 400/426/450

    Yamaha
    It's not starting. Eliminated everything down to the cams/valves. Sent from my SAMSUNG-SM-G890A using Tapatalk
  9. Project: eBay Special WR/YZ 400/426/450

    Yamaha
    One thing that I completely forgot to acquire was an ECU. Just ordered a YZ426 ECU to go along with the hotcams. With this I'll pull the R/H radiator, reroute some wires and get everything final installed. Then the only thing to do will be to add oil and coolant and see if this thing will...
  10. Project: eBay Special WR/YZ 400/426/450

    Yamaha
    Well, as promised the day finally came to get this project back on track. Now it's down to ordering some random necessary parts and then it'll be time to see what surprises present themselves once the bike starts. Should be all downhill from here! Sent from my...
  11. 09 WR450 Build. Project "Keeper"

    Project Builds Showcase
    Got a few. Working on a race bike right now which is almost done and then I've got a CR500AF that'll be on 17's and street legal. A couple of othet minis that'll be street legal as well. Sent from my SAMSUNG-SM-G890A using Tapatalk
  12. 09 WR450 Build. Project "Keeper"

    Project Builds Showcase
    I've read where the vortex cdi allows the TPS to be run, but I have no experience with them other than what I've read. Sent from my SAMSUNG-SM-G890A using Tapatalk
  13. 09 WR450 Build. Project "Keeper"

    Project Builds Showcase
    Warp 9 is the only place to get them now and as an added bonus they have a lifetime warranty. Sent from my SAMSUNG-SM-G890A using Tapatalk
  14. 09 WR450 Build. Project "Keeper"

    Project Builds Showcase
    On your's yes, just the exhaust cam and the valve clearance should be just fine, but I'd double check the clearances after you install it just to make sure. Sent from my SAMSUNG-SM-G890A using Tapatalk
  15. 09 WR450 Build. Project "Keeper"

    Project Builds Showcase
    No sir, just install the cam. Sent from my SAMSUNG-SM-G890A using Tapatalk
  16. Wr450 no brake light signal on brake perch

    Tech/Setups for Supermoto
    You need one of these: Look at this on eBay http://www.ebay.com/itm/142081058064 It has the necessary brake switch, is the same dimensions as the m/c on the street legal/adr bikes in Australia, and will improve your braking immensely. Sent from my SAMSUNG-SM-G890A using Tapatalk
  17. 2009 ktm 690 smc. may trade for drz+cash - No Longer Available

    Bikes
    Do you still have the passenger pegs?
  18. Crash279 2014 YZ450 Build

    Yamaha
    The headlight is definitely badass. The dimmer switch works basically as a two way switch (or whatever you would call it...basically it clicks down in the on position and back up is off) and is on a ground circuit. The light in the dim mode is just right for riding around town, but when...
  19. Austin, TX ride alert thread...

    Local Supermoto Ride alerts
    There's one in San Marcos I believe... Sent from my SAMSUNG-SM-G890A using Tapatalk
  20. Is RAD Mfg going out of business? SALE

    Chat
    Dude, you are a life saver! I need to go pull off the wheels and get the bearing numbers for them but this is a much needed break for me! Thank you so much for the heads up!
1-20 of 192 Results
Top