Ccs Road Race Homested 13&14 Feb.

[KWhusky]

Heading To Homested On Feb. 13&14 Rideing Smr 560. My Friend Is Rideing 625. FIRST RACE OF 2010

[koltsov71]

Lets kick some SVs,Ducs and Bimotas..

[Antikid]

what's the deal with the fenders? kind of weird looking

[dodge131]

Post up your results when you get back!!!

[KWhusky]

what's the deal with the fenders? kind of weird looking

HANDLES MUCH BETTER AT 115. MAYBE CARBON FIBER WILL LOOK BETTER

[Pittenger5]

Lemme know how a tard manages there. Going to be moving ~15 minutes from homestead soon, dont know if I should dump the tard for an SV or what.

[koltsov71]

Pittenger more motards,more fun..for us,I dont know about the sport bikes,so take your motard and lets ride it!!!
And the stock fander (soft plastic) is big meeeeessss at 115 mph +

[KWhusky]

Lemme know how a tard manages there. Going to be moving ~15 minutes from homestead soon, dont know if I should dump the tard for an SV or what.

MOST OF LAST YEAR RAN A HUSKY 610 53 HP COULD NOT KEEP UP SV IN IN LONG FORNT & BACK STRAIGHT. BOUGHT 560 SMR BILT FOR ROAD RACE has 62 HP. MOST SV CANT KEEP UP WITH ME NOW.IN THE TURNS THEY NEVER DID.

[Pittenger5]

Yah, I have an RMZ450, put down 51 last year. Have a 690SMC street bike too, I dont think racing will be in the budget right away, but hopefully hit at least a couple track days.

[Jer]

MOST OF LAST YEAR RAN A HUSKY 610 53 HP COULD NOT KEEP UP SV IN IN LONG FORNT & BACK STRAIGHT. BOUGHT 560 SMR BILT FOR ROAD RACE has 62 HP. MOST SV CANT KEEP UP WITH ME NOW.IN THE TURNS THEY NEVER DID.

What do you have done to the motor?

[Antikid]

HANDLES MUCH BETTER AT 115. MAYBE CARBON FIBER WILL LOOK BETTER

that is kind of what i was thinking, but wasn't really sure.
what does the back of the fender look like? real short? holes?
my curiosity meter is pegged.

[KWhusky]

What do you have done to the motor?

07 KTM 560 SMR
FL tag and street legal with clear title
13 hours total time
Main bearings went at 11.7 hrs
Dave Hopkins built engine, receipt included ($1559.00)
Head ported and polished with Ti valves
5 angle valve job
Crank welded and balanced
Ball bearing conversion
13:1 Wosner piston
41 MM FCR modded by Dave
KTM Slipper clutch
Akrapovich Ti exhaust
Dunlop race slicks
GPR stabilizer
14-16 degree triple trees
3.5 front rim 5.00 rear rim, chain guide
Trail Tech kick stand
Acerbis head light (not installed)
Edge tail light (not installed)
KTM brake light switch (not installed)
100 watt Trail Tech stator
Removable battery and voltage regulator
GMD suspension/frame rework $1,500
Set up for a 190lb rider
Bike is in mint condition
Put lights on for engine break in on the street
Put 1.3 hrs on new engine
Race prepped with locked hardware and “Evans” radiator coolant
Oil and filters changed
THIS IS HOW I GOT THE BIKE.THEN I PUT A VORTEX IGNITION,E-START WAY TO MUCH WORK TO KICK IN FULL GEAR,DYNO TUNE FOR VP U4.2 RACE GAS. THIS RACE WILL TEST THE NEW VP 4.4

[KWhusky]

that is kind of what i was thinking, but wasn't really sure.
what does the back of the fender look like? real short? holes?
my curiosity meter is pegged.

MY FRIEND KOLTSOV71 HAS HIS FENDER MOUNTED ALLREADY ON HIS625 WILL TAKE PHOTOS & POST THEM

[koltsov71]

MY FRIEND KOLTSOV71 HAS HIS FENDER MOUNTED ALLREADY ON HIS625 WILL TAKE PHOTOS & POST THEM

Hey Tommy ..you are enemy ....specialy on the track when your bike is 40 pounds ligther.But dont worry I will find some tricks to beat you

[JARVIS518]

motards struggle with that track a little because as others have said the long straights, a good track to look at for the sumos is PBIR (old moroso) with only one really long straight and more technical turns, let us know how u do. i got a couple of friends that race white plate sport bikes for ccs

[koltsov71]

motards struggle with that track a little because as others have said the long straights, a good track to look at for the sumos is PBIR (old moroso) with only one really long straight and more technical turns, let us know how u do. i got a couple of friends that race white plate sport bikes for ccs

yes PBIR is nice track but the straight is tooooooo long,rigt now is best for motards Jennings.But I like make the sportbikers nervous everywher

[Jer]

07 KTM 560 SMR
FL tag and street legal with clear title
13 hours total time
Main bearings went at 11.7 hrs
Dave Hopkins built engine, receipt included ($1559.00)
Head ported and polished with Ti valves
5 angle valve job
Crank welded and balanced
Ball bearing conversion
13:1 Wosner piston
41 MM FCR modded by Dave
KTM Slipper clutch
Akrapovich Ti exhaust
Dunlop race slicks
GPR stabilizer
14-16 degree triple trees
3.5 front rim 5.00 rear rim, chain guide
Trail Tech kick stand
Acerbis head light (not installed)
Edge tail light (not installed)
KTM brake light switch (not installed)
100 watt Trail Tech stator
Removable battery and voltage regulator
GMD suspension/frame rework $1,500
Set up for a 190lb rider
Bike is in mint condition
Put lights on for engine break in on the street
Put 1.3 hrs on new engine
Race prepped with locked hardware and “Evans” radiator coolant
Oil and filters changed
THIS IS HOW I GOT THE BIKE.THEN I PUT A VORTEX IGNITION,E-START WAY TO MUCH WORK TO KICK IN FULL GEAR,DYNO TUNE FOR VP U4.2 RACE GAS. THIS RACE WILL TEST THE NEW VP 4.4

Did you get the carb bored to 43mm? I'm thinking of taking the e-start off mine. I'm hoping once it's jetted correctly, she'll start quickly. I'm building mine for road racing currently, as well. My first race won't be until may though. STUPID CANADIAN WEATHER!

[hmontaq]

Funny I am moving to Homestead in a couple of weeks

[koltsov71]

Funny I am moving to Homestead in a couple of weeks

So I hope you will join us

[hmontaq]

Sounds good

[KWhusky]

just put back togetherthe625 and new carbon fiber fender on560

[samizx7]

what class are you going to run. i was planning on taken my sxv

[Antikid]

those wheels look great. did you paint them or they hard parts?

[KWhusky]

what class are you going to run. i was planning on taken my sxv

WE RUN ULTRA LIGHT SUPER BIKE,GTL,LIGHT WEIGHT GRAND PRIX,SOME TIMES THUNDER BIKE,LIGHT WEIGHT FORMULA 40

[KWhusky]

those wheels look great. did you paint them or they hard parts?

THEY ARE PAINTED WE WORK AT A PAINT & BODY SHOP IN KEY WEST, FL.

[Antikid]

Thanks

[Jer]

Any updates?! How did it go?

[KWhusky]

FOR ME IT WAS A GOOD WEEK END. FINISHED 6TH IN AMATEUR GT LIGHTS OUT OF 16 AND FINISHED 2ND OUT OF 8 IN AMATEUR ULTRA LIGHT SUPER BIKE.COMPITION WAS SV 650,YAMAHA 400, DUCATI 800,900&1000,BIMOTA1000.GUY ON SV650 WAS A VERY FAST RIDER FROM CANADA WON BOTH RACES. MY FRIEND HAD ENGINE TROUBLE AFTER SATURDAY PRACTICE DID NOT RACE ON SUNDAY. HE HAD GOOD CHANCE OF WINNING BOTH RACES WITH WITH HIS LOW LAP TIMES. HEAR IS THE WEB SITE http://www.ccsracing.us/results/2010...%20Results.htm

[bmxr]

I love running Homestead on supermoto bikes! I always did beter there than Jennings. I always did well at Moroso due to the bus stop chicanes that were there at the time, too. Glad to hear there are still a few of you guys representing supermotos out there!

[koltsov71]

I love running Homestead on supermoto bikes! I always did beter there than Jennings. I always did well at Moroso due to the bus stop chicanes that were there at the time, too. Glad to hear there are still a few of you guys representing supermotos out there!

yes we still trying to keep motards there...but wish for more too,if we find 10 people we can have own class

[hutch56]

Just an FYI, in case anybody didnt' know that AHRMA has a dedicated Motard road race class as part of it's "Sound of Singles" National series. I had to work pretty hard to get the class removed from probation last year and now need as many guys as possible to show up when AHRMA comes to your part of the country, There is Bridgestone Tire contingency and year end bonus from Vanson leathers

http://www.ahrma.org/Road_Racing_Modern.htm

Thanks!

[J Banning]

Subscribed

[KWhusky]

Heading Jennings Gp In North Fl. 11 Hr Ride From Key West. Have New Pit Bike With Matching Paint Job.560 Smr Has New Paint Job. 625 Has New Cam Chain And Tentioner After It Broke Last Race.

[bmxr]

I plan on being there, so maybe I can meet 'ya. I will be the guy with the Florida Supermoto Staff shirt!

[hmontaq]

Need to know what you guys charge for painting. Good Luck!

[KWhusky]

Packed Up For Jennings Gp

[Augustus]

yes we still trying to keep motards there...but wish for more too,if we find 10 people we can have own class

You guys should show up for next "real" supermoto race (305motard.com) at Miami GP Raceway on May 9th. We can find 10 supermotos easily for next CCS race.