What handle bars are these ? they look like a high bend and I like them, details please ????
What handle bars are these ? they look like a high bend and I like them, details please ????
Yeah buddy,THAT'S ONE BAD HUSKY for sure!!
http://www.carbon-performance.com/in....php?kat_id=61 Not sure if it will fit the 08' tho....Originally Posted by sperra.no
Take a look through this also if you like. Helped make a list in the husky section... (there are alot of carbon sites in it also)
http://www.supermotojunkie.com/showthread.php?t=77536
Last edited by mmulisha1022; 03-09-2010 at 09:35 AM.
Sumo: 08 Husky SMR 450
Mx: 08' CRF 250
2001 R6: Wont be missed with the replace of the SM
That gotta be the best looking husky that I have ever seen. Nice work. But I think that red rear Sprocket could look good with red chains. http://www.ekchain.com/color.htm
emjey, thanx, i have ordered one to the local shop, but not picked it up yet.. i think it will be to much red?? dont you?
mulisha. it doesnt i spoke to the guy, he sayd it fited, but its for the model before 2008, and that does NOT fit at all..
hey man.. damn i dont remember, but if you go 2 pages back you will find info about the handlebar, its renthal's fatbar, with the highsteer yes
I dont think its too much. Its gonna look just perfect whit all that carbon...
NO red chain PLEASE. It will be too much, besides the gold of the chain works well with the gold piece that holds the front brake rotor. It's all about balance. Don't upset what already looks well balanced to me.
'09 Husqvarna SM510R
'09 Triumph Street Triple R
'00 KTM 250 MXC
'01.5 Audi S4 Avant 6spd
'99 Ford E350 7.3psd Hi-Top.
Bike is SICK. Love the rims. But to make it perfect for me i would change a few things... Too much plain white in the back. Too much plain black in the front. You have a wicked set of graphics, which match well with the rims and all the accents (hubs, pegs, nipples ect.) I think you need to keep that going with all the other body parts. Don't over do it but add somthing to break it up. Not a big fan of the headlight either. I would do a KTM light for the front. There was a new headlight that came out about a year ago... and i searched for you for a while to show you and i just couldn't find it... Sorry :( Urs looks to much out of this world for me. As far as the chain... i wouldnt add it yet. i would finish your bike up first then see if you think it needs another accent peice. And maybe i would consider, Instead of red maybe white or black...
Thats just my opinion. Maybe it will give you some ideas. Awsome build my friend. I don't think you will ever feel done... Haha cuz i never do.
Sumo: 08 Husky SMR 450
Mx: 08' CRF 250
2001 R6: Wont be missed with the replace of the SM
thanx mulisha.. Love your suggestions.
about the light, i know its little bit freaky! but im probably the onlyone using it on the street. i need something different then the standard cheap shit people use
The chain, i think red would be way to much!
but
You guys remember my dilemma ? what ever i do it look like a shitty husky?
i tryed to break the long boomerang look on the side.. and managed to do it like this:
What ya think?.. from my point of view. it finally looks like motard/motox bike!! and not a husky
Looks like porn on wheels dude! And the wheels are porn as well!
I totally agree with you on the 'boomerang' thing by the way.
I'm picking up a new (yes, 0 miles) 2008 SM510R in a few weeks, and was already thinking about changing the graphics a little to not have that 'boomerang' effect.
It's the only thing that slightly bugs me about the Husky, the rest is just awesome :P
Looks like you managed to take care of it with just a simple piece of 'tape'?
Husqvarna SM510R 2008
hehe yep! i have some black mat vinyl left from my race car, and tryed just quick to split the "numberplate" som the shrouds.. and it looks WAY better!
im gonna re-doit later with some different vinyl.. this one is to thick.
looks awesome
but the rear is a little too white, needs the same graphics as on the front
Best lookin sumo I've ever seen
2006 DRZ SM
1999 CR 250 MX
super, thanx.. but thats probably just cuz NO ONE wants to do shit with them...
i know why
That's a long wheelie man. Good job. Stay safe!
2005 525 smr2004 200 exc
is that wheelie with your foot in the fender? I think your carbon fork protectors could use a graphic, something red and white to help break up the black. That's what I'm gonna do to mine, and I still have the white headlght/numberplate. I know you don't want to cover up the carbon but I think it would help the balance/aesthetic of the bike a lot.
also agreed about a little too much white in the back, although I am a fan of a "Fade" scheme on things, where one end is mostly one color and the other end is mostly the other color. It seems a little too polarized though.
'09 Husqvarna SM510R
'09 Triumph Street Triple R
'00 KTM 250 MXC
'01.5 Audi S4 Avant 6spd
'99 Ford E350 7.3psd Hi-Top.
ok guys. ill see what i can do,)
i can do way longer wheelies btw, but i get tired in my hands, this was my first trips since september 2009
Finally i have pics of my little upgrades...Its not as good as sperra, but, im student of high school, so my money - status isnīt very good:-D
So letīs start:-D - This is pics from day, when iīve bought SMR :-) Seting up clutch,brake lever position, gearchanger position
Little one:-*
New license plate holder (UFO DOT4 approved)
Our number plates in slovakia is horrible big !!! Policemans "canīt"see the plate small, so they have to write a law: "Every motorcycle with engine over 50ccm MUST have a license plate BIG (like me)...
Acerbis rally pro handguards
Have to drill holes to handlebars
New custom exhaust from RAAS-MX.com
Last edited by Rixo; 03-15-2010 at 04:36 AM.
Husqvarna Sm 125 S ī05 - for sale - 2500,-
-WISECO piston kit with ca 3500 km
-new Nicasil
-new cylinder head
-new HGS pipe (im going to put it in chrome)
I just did bark busters on my 610. Didn't have to drill out the bars. Tapped the bar with a 1/2 fine thread (20), very easy. Found some nylon spacers 1 inch long, 1/2 dia, 1/4 bore. tapped inside 8mm for the bark buster's bolt and cut threads to match the tapped bars on the outside. Used a 1/2 drill chuck as a pin vise. With sharp tools was easy. Biggest trouble was re-bending the busters to go around the levers, damn if I'm cutting the levers. I used Moose 's busters, very robust. Would have preferred to go metric, but I went with what was expedient.
Nunquam cum asino ambige.
- - - - - - - - - - - - - - - -
'06 SM610 - gettin' better all the time.
past tense: '00 Super Sherpa;'86;CB700SC; '84 FT500; '82 MB5; '78 SR500; '72 CB500; '67 S90
Here is one upgrade - Homemade Axle slider made from Silon and allumnium
It could be little shorter...But its my first work...
Little poze:-)
The old one and the new one:-)
Husqvarna Sm 125 S ī05 - for sale - 2500,-
-WISECO piston kit with ca 3500 km
-new Nicasil
-new cylinder head
-new HGS pipe (im going to put it in chrome)
Posting Permissions
Reply With Quote
