Site to order pre drilled nuts and bolts?

[Magiksc]

To make my WR 250 X track legal I need to drill and safety wire my axle nuts, drain plug and etc. I have seen a few companies selling pre drilled components for safety wiring., just wondering if anyone knows were I can find some? or if any cross over from a YZ?

Thanks.

[pazzoduc]

The aircraft industry sells bolts that are drilled on the thread end....

This question gets asked periodically. Heck, I even asked it once.

In the end, you are better off just doing it yourself. After you get started, you realize it's pretty easy. And if you install all of your bolts ect, you can use a sharpie to mark where the holes should be for proper installation. Safety wiring has a degree of art form to it. It can be done well and correct, or poorly and a mess.

Do a search on here. You will find some good info. But not much in the way of nuts & bolts.

1/16" and 3/32" drill bits, a vise, some oil and some patience will go far.

[Mr_Snips]

mcmaster.com

if you cant find it there...look harder.

[damndummyracing]

I agree with Mr Snips. McMaster.com

[pazzoduc]

You guys must have Harleys.....

Look for metric... not as easy.

[fast507]

Brown Tool Co. or yardstore.com. Take it from me, a veteran of the aircraft fab business...

[kan3]

tastynuts.com
racebolts.com
yoyodyneti.com

Unfortunately, these are only in Ti which I doubt you're looking for.

[fast507]

brown tool or yardstore should have a small jig that you can use to drill the heads on your stock bolts