drz400e exhaust to sm

[bababoy]

hello.

quick question. a friend found a drz400e after market exhaust. my question will i have any issues in terms of fitment with an sm?

thank you.

[wholigan?]

i dunno about the whole system. the header is a bigger diameter than stock sm and willl give more power...not sure about fitment though.......sorry!

[kfxrider90]

Idont think it will work. Lining up the holes to the subfram as they have diiferent subframs.

[TheGarden]

I have a E muzzy on my S model (same as SM). If you take off the passenger peg the lower hole lines up with the threaded hole on the exhaust. But you'll have two threaded holes in a row and that's no good so take a drill and drill the lower hole on the frame a bit bigger to get rid of the threads on it so you can use the threaded hole on the exhaust. The same bolts that held the peg on will work on the pipe (at least on the muzzy) and you can even still use the peg if you want.

[bababoy]

hey garden.

so there is no issue on the exhaust mount on the canister? what im getting is the only prob would be the support on the piping itself? jackpot?

thanks!

[saki302]

It will fit. Those of us running Yosh Ti exhausts are running E versions on our SMs.

You will have to mount the screw in th ebck through the footpeg mount as posted above.

-Dave

[bababoy]

alright thanks a lot people!

[TheGarden]

hey garden.

so there is no issue on the exhaust mount on the canister? what im getting is the only prob would be the support on the piping itself? jackpot?

thanks!

NO