Looking for Ideas? Post a Photo of your SM XR650.

**Jolly705** · 08-03-2005

I know a lot of guys have posted there bikes somewhere on this site but rather than searching through a millions posts I would love to see some photos of your supermoto Xr's to get some ideas.

Thanks in advance.

**Quickbrit** · 08-03-2005

Here's mine

I'm assuming you meant XR650R?

MikeE

**Jolly705** · 08-03-2005

Quickbrit
I just finished reading that article a few hours ago. Motart sent me the link

Great looking bike! I def. can't put all that into it yet but def. gave me some ideas. I like the fork brace a lot

Thanks

**makalu** · 08-03-2005

Here Ya Go Lots Of Ideas Here.

**Jolly705** · 08-04-2005

Keep them coming...

I really want to put some CRF black plastics on it. I just have to figure out how diff. it really is and if it is worth it.

Thanks guys.

**mountainrider** · 08-04-2005

She is mine even though she ain't pretty.

**RichieB** · 08-05-2005

......

**Alex66** · 08-31-2005

Mountainrider,
Where did you get the front fender ? ... Nice look.
The head light too ? ....
Thanks, Alex

**louR7** · 08-31-2005

my old 2003 XR650R SM'ed

**dvo1** · 08-31-2005

Latest pic.

Dan V.

**kubiak** · 08-31-2005

this isnt a xr 650 but its a 89 xr 600 with some mods you might use on a xr 650.xr 650 steel tank with shroud tabs welded on for cr shrouds,ducati undertail exhaust,cr usd forks,cut up xr 650l side panels,ktm sm front fender,cut up cemoto rear fender,blacked out frame and motor,dark green painted plastics,cut up stock xr 600 seat and tons more stuff.

**kubiak** · 08-31-2005

heres the other side

**jballs21** · 08-31-2005

Heres mine

**Jolly705** · 08-31-2005

Originally Posted by kubiak

heres the other side

This bike is awesome!

**Dancore** · 08-31-2005

1993 xr650l

**DanT** · 09-03-2005

Here's Steve Drews XR650 from Vegas 2003.

**gnarly sprockets** · 09-05-2005

Others

**spazi-moto** · 10-11-2005

Sweet lookin' bikes, looking into getting a CRF 450, wondering what the weight differences, and advantages of the 650's are, anyone clue me in a little? Make me a not so noob to the motard world?

Thanks

**WILD_FX** · 10-11-2005

I always did like this shot ..

**Tommy D** · 10-11-2005

Here's mine, just got it on the road, there's a lot more to be done before it's finished.

Here's a good idea to start with.

**Jolly705** · 10-11-2005

This is what I have so far, more mods and parts to come.

**ride67** · 10-13-2005

nice ride,so your ready for some street riding
drop a line my ride is riding,and so am i
weather permiting nice ride
don't touch the forks or buy a brace
upsidedowns are an easy mod and make a world

**Tommy D** · 10-13-2005

What USD's are you using? i almost bought a set of marzocchi shivers but got told they were crap?

Is it worth getting a pair of CRF450 forks and modifying the valving for the road, or are you better off spending the money up front and getting a set of supermoto forks at the start?

**Jolly705** · 10-14-2005

Chris
The next two weekends I am off racing but after that I will def. hit some streets. I will keep you posted.

Originally Posted by ride67

nice ride,so your ready for some street riding
drop a line my ride is riding,and so am i
weather permiting nice ride
don't touch the forks or buy a brace
upsidedowns are an easy mod and make a world

**Whitetrash** · 10-15-2005

Awesome pics!!! heres my 2001 XR

hoping to go the way of CRF plastics very soon!!!

How much will a set of those USD forks set me back???? they look stunning!!!

**stoo** · 10-16-2005

Sigh.

One day, I'll get my engine back......

**supaflyryan** · 10-25-2005

Here's my Pig.

Clarke 4.7 gallon black fuel tank
Acerbis Supermoto black front fender
Maier rear fender -painted black
Baja Designs LED taillight/license plate light kit
Acerbis Blitz headlight upgraded w/ 50W bulbs
Relocated battery and electrical system
Flat black painted frame
Trimmed XR650 rear number plates
Behr 17" black rims, 3.5" front, 5" rear
RAD red anodized one-piece billet RAD hubs & carriers
Buchannan HD spokes & nipples
Bridgestone Battlax BT-014 tires, 120/70 front 160/60 rear
RK X-ring chain
Renthal handlebars
Eibach rear 2" lowering coil
White Brothers 2" lowering fork springs w/7wt oil
Drilled carburetor slide
Shimmed carburetor needle
55 pilot and 158 main carb jets
All smog equipment removed

**XR-MANU** · 10-26-2005

http://forum.17pouces.net/viewtopic....ghlight=xrmanu

**XR-MANU** · 10-26-2005

http://img190.echo.cx/img190/8652/picture02819qe.jpg

http://img193.echo.cx/img193/2549/picture02961gy.jpg

http://img247.echo.cx/img247/5030/dcp00015lc.jpg

**Jolly705** · 10-26-2005

That is one clean looking XR. What year is it?
I just got my 320 for the front and am picking up my SM fender on Sunday

Originally Posted by XR-MANU

http://img190.echo.cx/img190/8652/picture02819qe.jpg

http://img193.echo.cx/img193/2549/picture02961gy.jpg

http://img247.echo.cx/img247/5030/dcp00015lc.jpg

**Jolly705** · 10-26-2005

I like the all black. I wish someone made all black plastics for the XR.

Originally Posted by supaflyryan

Here's my Pig.

Clarke 4.7 gallon black fuel tank
Acerbis Supermoto black front fender
Maier rear fender -painted black
Baja Designs LED taillight/license plate light kit
Acerbis Blitz headlight upgraded w/ 50W bulbs
Relocated battery and electrical system
Flat black painted frame
Trimmed XR650 rear number plates
Behr 17" black rims, 3.5" front, 5" rear
RAD red anodized one-piece billet RAD hubs & carriers
Buchannan HD spokes & nipples
Bridgestone Battlax BT-014 tires, 120/70 front 160/60 rear
RK X-ring chain
Renthal handlebars
Eibach rear 2" lowering coil
White Brothers 2" lowering fork springs w/7wt oil
Drilled carburetor slide
Shimmed carburetor needle
55 pilot and 158 main carb jets
All smog equipment removed

**supaflyryan** · 10-27-2005

Originally Posted by Jolly705

I like the all black. I wish someone made all black plastics for the XR.

The only thing I had to paint was the side panels (I painted the fender too but I'm pretty sure Cemoto makes a black one). My engine came all black when I bought it, I'm not sure if that was done aftermarket or what? I haven't seen any other motors like that.

**dvo1** · 10-27-2005

Dan V.

**XR-MANU** · 10-27-2005

Originally Posted by Jolly705

That is one clean looking XR. What year is it?
I just got my 320 for the front and am picking up my SM fender on Sunday

XR 600 '93 : Custom home made grafics,seat ,Custom made Carbon can,....

It had a new rod ,hc piston,CRD headers,airbox mod ,new Excels etc... 8)

**XR-MANU** · 10-27-2005

This is a very,very nice one

**max2** · 10-29-2005

here's mine

**XRsick50** · 10-29-2005

Kinda like SupaFlyRyan's

**TRIGUN** · 10-31-2005

Excellent!! How are these guys fitting these shrouds? Does someone make a kit, or are they all custom?

Originally Posted by XR-MANU

This is a very,very nice one

**stoo** · 11-01-2005

Originally Posted by TRIGUN

Excellent!! How are these guys fitting these shrouds? Does someone make a kit, or are they all custom?

There is a kit - but it includes a different fuel tank and isn't that cheap.

The one in your pic is the Monnier one - http://www.monnier.ch

There's also another similar one which uses an Ally tank and lets you fit CRF shrouds, IIRC.

**dvo1** · 11-01-2005

http://www.blitalia.com/

Aluminum tank

Dan V.

**TRIGUN** · 11-01-2005

All I see is a red X. Would it be possible to post another pic of your bike? If that's it in your avatar, I'd be really interested in seeing it.

Thanks

Originally Posted by dvo1

Latest pic.

Dan V.

**chiricahua** · 11-16-2005

Dirt Trim on the street

and Street Trim on the dirt.

Cost of a second set of tires and tire irons.

**Hobbes** · 11-24-2005

This guy does the CRF tank kit and black plastics for the XR650R. He's in the UK so might not be much use to you guys.

**TRIGUN** · 11-24-2005

Originally Posted by Hobbes

This guy does the CRF tank kit and black plastics for the XR650R. He's in the UK so might not be much use to you guys.

Thanks Hobbes! His MX style XR650R rear fender and black plastics say UFO on them. Maybe you can just order them direct from UFO?

**stoo** · 11-25-2005

Finally got my pig back together yesterday.

Think it's about time I took it out and made some noise.

**Hobbes** · 11-25-2005

Originally Posted by TRIGUN

Thanks Hobbes! His MX style XR650R rear fender and black plastics say UFO on them. Maybe you can just order them direct from UFO?

I reckon so, any idea who the US importer is for UFO ?

About time Stoo !

**TRIGUN** · 11-25-2005

Originally Posted by Hobbes

I reckon so, any idea who the US importer is for UFO ?

About time Stoo !

From what I can find it looks like Tuf Racing is the US importer. I emailed them today, so I'll let you know when I get a response.

**SuperMofo33** · 12-01-2005

Originally Posted by kubiak

this isnt a xr 650 but its a 89 xr 600 with some mods you might use on a xr 650.xr 650 steel tank with shroud tabs welded on for cr shrouds,ducati undertail exhaust,cr usd forks,cut up xr 650l side panels,ktm sm front fender,cut up cemoto rear fender,blacked out frame and motor,dark green painted plastics,cut up stock xr 600 seat and tons more stuff.

Kubiak - Dude you wanna sell her? I promise to giver her a good home...seriously.

-Chris

**ToddW** · 01-31-2006

XR-MANU,
Any idea who makes the skid plate on that 650R? I was talking with E-line for a while about building a carbon skid plate for a while but they never went through with it.

**kubiak** · 01-31-2006

supermofo33, i dont think i can sell it because it would take too much work to do another one the same.its setup perfect for me now.maybe if i got a 650l and tranfered all the parts over then i wouild have electric start!

Thread: Looking for Ideas? Post a Photo of your SM XR650.

Thread Tools

Display

Looking for Ideas? Post a Photo of your SM XR650.

here is mine

Luv Your BRP!

Posting Permissions