somebody using 1 of this brake discs?
bear mtn ny
Fcr 39mm, Athena 12.5:1 piston, Hot cams, Full yoshi pipe, Led signals, Tail light kit, Ufo front fender, Enduro headlight, Supermoto engineering sliders, Fat slider footpegs, Gripper seatcover, Fly racing bars, and Heidenau k73 front and rear rubber.
Heres mine. 07 drz sm. Mods: Fcr, Crd qp full exhaust, led taillight and indicators, protaper bars, e modell tank and subframe, new plastics and a lot of small bits.
havent seen any white with blue rims in here??
im thinking about buying this bike
how would it look with black plastics and the blue rims? never thought id buy a white bike but it does look pretty sweet
My first trackday this past weekend at NJminiGP karting track. Had so much fun!
Here's my DRZ in race mode.
MRD/SSW, FCR39, Suspension valved, Pilot Powers, lil Ballistic EVO 4-cell guy
Broke my shift lever first session of the day. Had to deal with this BS all day, made shifting a nightmare. Eventually I drilled a hole and stuck a bolt in place.
And here is our little XR100 mini-motard. It's actually more fun than the DRZ on this small track.
Last edited by nsh29; 10-15-2012 at 06:30 PM. Reason: .
So how has everyone been getting rid of those unsightly holes in the rear fender after removing the tool bag? I see some people just left the bolts on, but others have smooth fenders. Is there a fender from another bike that fits?
We do not rise to the level of our expectations, we only fall to the level of our training.
Here is mine
06 DR-Z 434SM, with so much mods I could have bought a KTM or Aprilla or Husky or a Tesla..
But then again, I am saving on all that needless maintenance.
Riding Game Tags - 53.
Im new to supermoto heres a pic of my DRZ what mods shall I do???????
Im new to DRZ's just got my own one. I think the standard bars are really ugly. Can any1 recommend any bars and a link to where i can buy them
With the new front fender and graphics.
What you think???
Last edited by Wheelie king!; 10-24-2012 at 01:37 PM.
Drz 400 E supermoto converted (road legal.. just about!)
KXF 250 motocross bike.
CRF 50 for the good times.
I lower the dash
At night its better than stock with a HID kit
Last edited by Zorro2012; 10-25-2012 at 12:24 AM.
Nothing too fancy.... for now! acerbis supermoto fender, some zeta parts, and a custom chain guard
just bought this bad boy
has lots of mods including mrd/ssw, fcr 39mm, 3x3, blue radiator guards, tail tidy
got the stock pipe and tail on atm for roadworthy certificate but ill change them soon
looks good dan. get the mrd back on asap
Heres my old drz, sold it two weeks ago and got a ktm exc 300 -12 now.
Not much modifications, just MRD/SSW, 3X3, BMX-pegs, modified the horrible chainprotector, KTM EXC frontlight, fatbar etc...
Edit: and yes ofc the paint and graphics!
Last edited by Kafi; 11-03-2012 at 05:42 PM.
fcr,athena,3x3,stainless lines,skateboard wheels,peg sliders,full yoshi,edge eliminator,zeta bling,power ones,big mirror delete,other stuff
just got my mrd/ssw and fender elim on and went for my first ride!!
sooo much fun!!
2005 DRZ400SM, 12,225 miles
Aftermarket upgrades: Keihin FCR flatslide carb (the Thumpertalk/Sudco kit made for the DRZ), full Yoshimura exhaust, HotCams cams, K&N air filter, MXtech springs for 230 pound rider, Venhill stainless brake lines, Zeta folding levers, SME axle sliders, APA muffler slider, fuel catch can, Acerbis handguards with integrated turn signals, LED taillight with integrated turn signals, supermoto pegs with sliders, Acerbis supermoto front fender, Renthal Fatbars.
New parts installed last season: plastics, custom graphics kit, rear tire, RK chain, battery.
Last edited by ridered2480; 11-13-2012 at 09:48 PM.
I just ordered a UFO vented number plate, planning on mounting lights behind the vents, trying to get ideas for remounting the cluster if need be. thanks.
Last edited by foster; 11-19-2012 at 07:31 PM. Reason: spelling
2001 Suzuki TL1000R
2008 Suzuki DRZ400SM
Thanks for the reply Zorro and the pics.
I'm gonna keep cutting away until I make it fit and
use your idea with the spacers.
My bike is an 08 with the big handle bar clamp up top.
The middle of the clamp is mostly for appearance.
Do you still run the stock bar clamps on yours?
Thanks again for the reply.
2001 Suzuki TL1000R
2008 Suzuki DRZ400SM
2005 DRZ E:
Excell SM wheels and tires
Cyrca Sm handguards
1 1/8 handlerbars
Trail tech mounted in bar pad.
cut fenders and side plates
RMZ 450 exhaust (cut)
Home made plate brack with led plate lights
led tail light
various vynil'd things
stock FCR39 jetted with aibox unpluged
My 2006. Pretty much the same as all the others. 440, fcr 39mm, 3x3, jetted, full yoshi, turkey baster, edge tail light, michelin power ones, stainless brake lines, skateboard wheels, peg sliders, under bar mirrors, other stuff.
Last edited by seanpuck; 01-06-2013 at 11:26 PM.
I just install this gripper seat cover and i love it
Last edited by Zorro2012; 11-30-2012 at 12:05 AM.
Has anyone chopped their FMF Powercore4?
Picked up my first supermoto the other day, been racing motocross for years (250 intermediate)
2009 DRZ400SM, 2600 Miles, $4,000 As seen in pictures.